| |
|
|
|
|
|
Adhesive Wax System |
 |
| |
|
|
|
|
 |
Great
for: |
| |
- Adhering media to any wall surface including signs, artwork, presentations, murals, digital wallpaper or posters
- Mounting presentations
or artwork to boards
|
| |
(Instructional
video to come)
|
| |
|
| |
About
the system |
| |
Combines
motorized roller coaters, or a hand applicator,
with a unique adhesive wax. Provides the following
benefits:
|
| |
Photo: Speedcote
24 ½" and 36 ½” models |
- Removable bond
- Will stick to most surfaces
including dry wall, brick, glass, metals,
fabric and concrete.
- Will adhere firmly to the surface for as long as needed (years)
- Immediately dry to the touch after applied to the back of the media (not sticky at all and does not even feel like an adhesive)
- Never dries out so you can
adhere media at any time (even years later).
- Peels
off easily
from
surface
without
damaging
the surface.
- Due
to the
wax melt
point,
not designed
for mounting
items
outdoors.
|
| |
|
|
| |
|
| |
Speedcote
Motorized Roller Coater |
| |
Automatically warms up to the proper operating
temperature in 20 to 40 minutes (depending
on the coater size). Press the motor
switch, then feed your print into the turning
rollers. Applies a full adhesive coating
in just seconds. Will not effect heat sensitive
media since it goes through so fast. Available
in 12”, 24.5” and 36.5” coating
widths. No daily maintenance.
Photo: Speedcote 12” model
|
|
| |
|
| |
|
| |
Adhesive Wax |
| |
A pressure sensitive adhesive. After you apply
it to the back of your print, you roll it down
to the desired surface using a hand roller. The
rolling action generates a firm bond. It
will stay down for as long as you want, but
can be peeled up when needed. Comes in refill
bars for the Speedcote coater and refill sticks
for the Procote handwaxer.
|
 |
|
|
|
| |
|
|
| |
|
|
| |
|
|
|
|
| |
|
