Rollataq - Adhesive Systems (motorized desktop & hand models)
 
  HOME  

Products

Rollataq comes in two models, the hand and the desktop models
 
Rollataq motorized desktops in 12", 24 1/2" 36 1/2" coating widths.
 
  Great for adhering photos, posters, labels and custom cards.  (note: for mounting wide format inkjet prints, see the Maxit adhesive system.)
    • Coats at 4 seconds per foot.
• Costs only 5 cents per sq. foot.
• Stays easily repositionable for up to 2 minutes.
• Rub material down, it sticks, and you're done.
• Dries to a permanent bond in 15 minutes.
• Will not be effected by heat, humidity or aging.
• Acid free, non toxic, non yellowing.
     
   
   

Turn motor on, insert edge of print into rollers (factory-set space keep rollers apart, so you never get adhesive on the image).

Bottom roller applies a
microthin coating as rollers pull print through.

   
 
     
   
Special adhesive provides superior coating and adhesion.
Adhesive formulated to stay fresh for weeks.
 
     
 
Rollataq 300 Hand Applicator
 
  Great for adhering photos, artwork, presentations, rubber-stamping and scrap booking.
   
 No more skimpy coatings. The Rollataq 300 rolls on a 2 ¼" wide micro thin  
    adhesive strip. The special acid free adhesive will not soak through even thin
    paper. Adhesive is not "sticky" so material is easy to reposition for up to 3
    minutes. Rub material down, it sticks and you're done. Dries to a permanent
    bond in 15 minutes. Will not be affected by heat, humidity or aging. Non-toxic,
    non-yellowing, non-electric.

    A 16 oz. Bottle coats 200 8" x 11" images at a cost of 3¢ each.
     
 
    Rolls on a 2 1/4" strip.
• Start at the lower corner and
   roll up.
• Then go to the bottom,
   overlap slightly and
   roll-up again.
• Continue until you cover the
   sheet.
     
     
     
     
     
     
        Air-tight cover keeps  
     adhesive fresh for months.
     









 

 
home
about us
ordering/pricing info
product overview